Towards sunset yesterday, we have the two dinghies lined up back to back. You can see how the rudder boards are adjustable. Also, note the mast partners. These are attached in thefollowing manner: the partners have a bolt with nut (keeps the bolt from falling through). Each gunnel has a corresponding hole in it. By sliding a bolt into a hole in the gunnel on each side (one to Port and one to Starboard) the mast partner is now in place. Afterward, lines are snugged down to the seats, holding the mast partners in the boat. The sail halyard is attached to one of the dowel pins, the sail down haul/back haul to the other pin.
No comments:
Post a Comment